You have 0 items in your cart.
By Brands
| Name | SKU | Description | Category | ||
|---|---|---|---|---|---|
|
Electrical Tester PCE-ECT 50-UK | Electrical Tester for testing earthing resistance / Installation category III / 7 meter measuring lead at the safety measuring tip / High measuring accuracy / Protection class IP40 / 50, 60 Hz operating voltage The Electrical Tester is a handy measuring device. Due to the robust and ergonomic design, the user can work comfortably with the Electrical Tester. The earthing resistance can be determined quickly with the Electrical Tester. In addition, a check can be made as to whether the... | Electrical Tester |
|
|
|
Electrical Tester PCE-PCM 1 | PCE-PCM 1 Electrical TesterInternal memory, USB cable and PC software / Three-phase power measurement / True RMS PCE-PCM 1 is a multipurpose electrical tester or power analyzer used to measure alternating current (AC), voltage (TRMS) and frequency to determine active (kW), apparent (kVA) and reactive (kVAR) power as well as active energy (kWh) consumption. Both the phase angle and the power factor (cos φ) are shown on the handheld power meter's large and easy-to-read backlit display. The... | Electrical Tester |
|
|
|
Electric Vehicle EVSE Tester PCE-EVSE 310 | Electric Vehicle EVSE Tester / vehicle simulation / cable simulation / CP output and mains socket for measuring purposes / incl. transport bag The electric vehicle EVSE tester is for VDE 0100 testers to test charging stations (charging mode 3) for electric cars. This adapter can be used with the PCE-ITE 55B installation tester or with most other standard VDE 0100 testers. Thanks to the LEDs for voltage detection on the 3 phases, it can be quickly determined if there is an installation... | Electric Vehicle EVSE Tester |
|
|
| Electric Vehicle EVSE Tester PCE-EVSE 310 (+) plus | Electric Vehicle EVSE Tester / vehicle simulation / cable simulation / CP output and mains socket for measuring purposes / incl. transport bag The electric vehicle EVSE tester is for VDE 0100 testers to test charging stations (charging mode 3) for electric cars. This adapter can be used with the PCE-ITE 55B installation tester or with most other standard VDE 0100 testers. Thanks to the LEDs for voltage detection on the 3 phases, it can be quickly determined if there is an installation... | Electric Vehicle EVSE Tester |
|
||
|
Environmental Tester PCE-FRQ 500 | Bug finder / Environmental Tester / acoustic signal output / adjustable sensitivity / 2 antennas This high-quality bug finder / Environmental Tester offers maximum security against surveillance devices and effectively protects your privacy. With a wide frequency range from 50 MHz to 8 GHz, it reliably detects analogue and digital signals as well as hidden WiFi cameras, GPS tracking devices, radio bugs, transmitters and wireless cameras. | Environmental Tester |
|
|
|
Elsec 2.5 Insulating Glove Class 00 | ELSEC 2.5 | ELSEC protective electrical insulating gloves are intended to be used exclusively for electrical purposes, as basic ppe for work under voltage up to 1kV, or as additional protective equipment for work under voltage higher than 1kV. These insulating gloves have been made to obtain high dielectric properties. It enables to gain high quality and repeatability of the technical parameters. | Hand Protection |
|
|
Elsec 10 Insulating Glove Class 1 | ELSEC 10 | ELSEC protective electrical insulating gloves are intended to be used exclusively for electrical purposes, as basic ppe for work under voltage up to 1kV, or as additional protective equipment for work under voltage higher than 1kV. These insulating gloves have been made to obtain high dielectric properties. It enables to gain high quality and repeatability of the technical parameters. | Hand Protection |
|
|
Elsec 20 Insulating Glove Class 2 | ELSEC 20 | ELSEC protective electrical insulating gloves are intended to be used exclusively for electrical purposes, as basic ppe for work under voltage up to 1kV, or as additional protective equipment for work under voltage higher than 1kV. These insulating gloves have been made to obtain high dielectric properties. It enables to gain high quality and repeatability of the technical parameters. | Hand Protection |
|
|
Elsec 30 Insulating Glove Class 3 | ELSEC 30 | ELSEC protective electrical insulating gloves are intended to be used exclusively for electrical purposes, as basic ppe for work under voltage up to 1kV, or as additional protective equipment for work under voltage higher than 1kV. These insulating gloves have been made to obtain high dielectric properties. It enables to gain high quality and repeatability of the technical parameters. | Hand Protection |
|
|
Elsec 5 Insulating Glove Class 0 | ELSEC 5 | ELSEC protective electrical insulating gloves are intended to be used exclusively for electrical purposes, as basic ppe for work under voltage up to 1kV, or as additional protective equipment for work under voltage higher than 1kV. These insulating gloves have been made to obtain high dielectric properties. It enables to gain high quality and repeatability of the technical parameters. | Hand Protection |
|
|
ELSEC S-100 LEATHER GLOVES | S-100 | Leather gloves ELSEC S-100 additional reinforcement of ELSEC electrically insulating gloves The gloves are made of cowhide grain leather, while the cuff is made of split leather. The latex used for the production of electrically insulating gloves is susceptible to mechanical damage. Therefore, ELSEC S-100 gloves are a great barrier to harmful external factors. Thanks to this, the risk of puncturing the gloves is minimized. Do you work under voltage as a fitter? Check out the tips... | Hand Protection |
|
|
Enpac 2-Drum Workstation 5117-Ye | Standard | ENPAC’s® Workstations™ are the easiest to load with a low-profile design and optional ramp. Each Workstation™ is designed for stand-alone use or can connect with other Workstations™ for a customized work area. | Leak & Spill Management |
|
|
Enpac 4-Drum Workstation 5116-Ye | Standard | ENPAC’s® Workstations™ are the easiest to load with a low-profile design and optional ramp. Each Workstation™ is designed for stand-alone use or can connect with other Workstations™ for a customized work area. | Leak & Spill Management |
|
|
Enpac 8-Drum Workstation 5110-Ye | Standard | ENPAC's Workstations are the easiest to load with low profile design and optional ramp. Each workstation is designed for stand alone use or combines with other workstations for a customized work area. | Leak & Spill Management |
|
|
Enpac Dual Cylinder Dolly 7302-Cg | Standard | Lightweight yet durable Dual Cylinder Dolly designed to be a more functional, maneuverable and better-balanced transporter for gas cylinders than conventional dollies or forklifts. Ideal for industrial or construction operations. | Leak & Spill Management |
|
|
Enpac Job Hut 4010-Ye | Standard | An extra-large storage for outdoors that is cost efficient and easy to access. | Leak & Spill Management |
|
|
Enpac Poly-Pail Funnel™ 3005-Ye | Standard | Poly-Pail Funnel™, Part number: 3005-YE | Leak & Spill Management |
|
|
Enpac Poly-Pail Funnel™ Cover 3051-Ye | Standard | Poly-Pail Funnel™ Cover, Part number: 3051-YE | Leak & Spill Management |
|
|
Enpac Poly-Rack System 6000-Ye | Standard | A durable Poly-Rack system that is the perfect containment solution for dispensing applications from 55-gallon drums. | Leak & Spill Management |
|
|
Enpac Racker/Stacker 6004-Ye | Standard | Multi-Purpose Racker/Stacker helps to maximize floor space. | Leak & Spill Management |
|